[Fwd: RE: [Muscle] APDUs]

[Scott Guthery]

Jeff:
 
Send me your e-mail address.  Perhaps I can provide some off-line help.
 
Cheers, Scott
sbg at acw.com

	-----Original Message----- 
	From: muscle-bounces at lists.musclecard.com on behalf of Jeff Fern 
	Sent: Mon 7/9/2007 3:16 AM 
	To: Peter Tomlinson 
	Cc: muscle at lists.musclecard.com 
	Subject: Re: [Fwd: RE: [Muscle] APDUs]
	
	

	Peter,
	
	Thanks for your reply ... I am on a very steep learning curve with all
	this stuff. The Omnikey dev. guide says:
	
	"Please refer to the [PCSC 2.01] and [MIFARE] for documentation of PC/SC
	2.0 compliant Mifare card access. The following section only describes
	usage of functions that are not already documented in [PCSC 2.01]. They
	are part of an OMNIKEY proprietary extension of PC/SC."
	
	The only info within the doc is regarding increment & decrement counter
	and MAD access.
	
	I understand the access requirements for each read/write command, and
	using the sample windows application have got that working ... I was
	hoping that wherever I find the APDUs for read/write would also have the
	access command APDUs.
	
	Regards,
	-Jeff Fern
	
	
	> Jeff,
	>
	> As far as I can tell PC/SC does not support memory cards. But some card
	> reader suppliers implement proprietary APDU-format commands on their
	> system interfaces, commands that their card readers convert into Mifare
	> commands - that will be what Scott is pointing you to.
	>
	> Also are you aware that you need to use access keys for all read and
	> write operations with a Mifare card?
	>
	> Regards,
	>
	> Peter
	>
	> Peter Tomlinson
	> Iosis Associates
	> Bristol UK
	> www.iosis.org.uk
	> www.pssg.biz
	>
	> -------- Original Message --------
	> Subject:     RE: [Muscle] APDUs
	> Date:     Sat, 7 Jul 2007 21:26:42 �� (BST)
	> From:     Jeff Fern <musclecard at fcse.co.uk>
	> Reply-To:     MUSCLE <muscle at lists.musclecard.com>
	> To:     MUSCLE <muscle at lists.musclecard.com>
	> References:     <468E7AE0.3010306 at fcse.co.uk>
	> <A4628A7C27BF0D48847FD4AB8536731D96AD0F at blinky.mobile-mind.com>
	>
	>
	>
	> Scott,
	>
	> Thanks for your reply. I think that it's the card I want to talk to - I
	> want to be able to read and write to the blocks on it.
	>
	> I have looked at that document, it basically says for MiFare most of the
	> PCSC commands work, there are a couple of custom ones which are listed.
	> The issue I'm having is I can't find the PCSC commands (or document which
	> lists them).
	>
	> Regards,
	> -Jeff Fern
	>
	>>  Jeff:
	>>
	>>  Are you stumped by commands for the card or the card reader? The
	>>  develper's manual for CardMan is at
	>>
	>>
	> omnikey.aaitg.com/fileadmin/CardMan__5x21-CL_Reader_Developers_Guide_v1_11.pdf
	>>
	>>
	>>  It has some MiFare information.
	>>
	>>  Cheers, Scott
	>>
	>>  -----Original Message----- From: muscle-bounces at lists.musclecard.com
	>>  on behalf of Jeff Fern Sent: Fri 7/6/2007 1:24 PM To:
	>>  muscle at lists.musclecard.com Cc: Subject: [Muscle] APDUs
	>>
	>>
	>>
	>>  Hi All,
	>>
	>>  I've just got JPC/SC working with my Cardman 5321 and a MiFare 1k
	>>  card. The windows software that came with the card reader includes
	>>  something that allows you to authenticate, read and write etc. to the
	>>  card however all I can see to do with JPC/SC is send APDU commands to
	>>  the card - the issue is apart from reading the UID I haven't been
	>>  able to find any specs for what APDUs to send. Can anyone point me in
	>>  the right direction?
	>>
	>>  Many thanks, -Jeff
	>>
	>>  -- This message has been scanned for viruses and dangerous content by
	>>  MailScanner, and is believed to be clean.
	>>
	>>  _______________________________________________ Muscle mailing list
	>>  Muscle at lists.musclecard.com
	>>  http://lists.drizzle.com/mailman/listinfo/muscle
	>>  <http://lists.drizzle.com/mailman/listinfo/muscle>
	>>
	>>
	>>
	>>  _______________________________________________ Muscle mailing list
	>>  Muscle at lists.musclecard.com
	>>  http://lists.drizzle.com/mailman/listinfo/muscle
	>>
	>>  -- This message has been scanned for viruses and dangerous content by
	>>  MailScanner, and is believed to be clean.
	>>
	>>
	>
	>
	>
	> --
	> This message has been scanned for viruses and
	> dangerous content by MailScanner, and is
	> believed to be clean.
	>
	> _______________________________________________
	> Muscle mailing list
	> Muscle at lists.musclecard.com
	> http://lists.drizzle.com/mailman/listinfo/muscle
	>
	>
	>
	> --
	> This message has been scanned for viruses and
	> dangerous content by MailScanner, and is
	> believed to be clean.
	>
	>
	
	
	
	--
	This message has been scanned for viruses and
	dangerous content by MailScanner, and is
	believed to be clean.
	
	_______________________________________________
	Muscle mailing list
	Muscle at lists.musclecard.com
	http://lists.drizzle.com/mailman/listinfo/muscle
	

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 9174 bytes
Desc: not available
Url : http://lists.drizzle.com/pipermail/muscle/attachments/20070709/9d800b0f/attachment-0001.bin